TS-G4224
2 Line Card Chassis, 2xSFP/SFP+, 2GE
Find a Distributor Contact Us
TS-G4200 GigaWire PoX Series offers Gigabit Broadband and Long Reach PoX solution to extend IP Ethernet transmission and inject power simultaneously into a remote ultra PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet. TS-G4200 GigaWire PoX Series includes headend device and CPE device, featuring long range data and power transmission over any existing coaxial, UTP cable or telephone wire and converts power to IEEE 802.3af/at PoE over another 100-meter Ethernet cable connected to the remote PoE PD. It is also an effective tool for powering Ethernet devices that need to be installed in areas where power is currently unavailable and would be difficult or costly to install. In such cases, power can be provided over existing cable, such as twisted-pair, coaxial cabling, UTP to simplify installation, save time, and eliminate the cost of new wiring. It provides multi applications for easy plug-n-play operation and deployment in various environments while keeping the installation of remote PoE PDs easier and more efficient.
TS-G4200 GigaWire PoX Series works in pairs for point to point connectivity, allowing upgrades from analog cameras to high-quality digital IP cameras in security and surveillance applications, interconnection of communication equipment in cellular backhaul applications, and interconnection of wireless equipment in WAN/LAN networks, all without the high cost of replacing the existing cable.
- Delivers Gigabit Broadband and Long Reach Power over Twisted-pair or Coaxial solution
- Ultra-high speed over existing 2 wire copper, 4 wire copper, coaxial cable
- Reduce time to service and save over 40% compared to switching to new cables
- Accelerate your return on investment by reducing infrastructure costs
- Simplify your IP modernization, collapsing planning and deployment time
- Eliminate infrastructure barriers, risks, disruption and costs
- Create a robust plug-and-play IP platform that is easy to deploy and manage
- Centralized Power Management, Power Sharing for Redundancy, PoE Usage Monitoring
- G.hn frequency notches management and dynamic bandwidth allocation optimizes throughput based on activity
- Various QoS capability (IEEE 802.1p / Port / Diffserv)
- Classification of different packet formats (IPv6, IPv4, double tagged, HTLS, IEEE 802.1Q, Ether II, IEEE 802.3)
- Egress /Ingress rate management control and broadcast storm control
- IGMP snooping for filtering multicast traffic
- Support port mirroring and port isolate
- Flexible Access Control List (ACL)
- Support SNMP v1/v2c/v3, SNMP trap and SNMP client
- Perfect network management through web browser, CLI, telnet and serial console with three management user level
- Support G.hn CPE devices monitor and configure from master
- Support remote firmware upgrade for both Master and CPE
- Support configuration backup and restore via TFTP
- Support SFP/SFP+ port digital diagnostic monitor interface (DDMI)Support port mirroring and port isolate
Hardware | |
System Architecture | G.hn Wave2 PoX Master 2 x Hot-swappable Line Card 2 x 1,000-X/10000-X SFP/SFP+ ports 1 x 10/100/1000BT RJ-45 port 1 x RS232 console port (RJ45/USB Type-C combo connector) 2 x SYNC BNC ports |
Physical Dimension | 44cmx30cmx4.4cm (1U rack-mount) |
LED | Power, System Active, SYNC, Alarm, SFP and RJ-45 port link/active |
Weight | < 4.2Kg |
Input power & frequency | Dual AC Input, 100 ~ 240VAC (50/60Hz), Each AC Power output: 300W max at 110VAC |
Power consumption | 600 W |
Line Card | |
TS-G4224-12B | 12 x BNC female 75 ohm connectors |
TS-G4224-12C | 12 x Type F female 75 ohm connectors |
TS-G4224-12T | 12 x RJ-45 connectors for 1-Pair, 2-Pair, 4-Pair twisted-pair |
Environment Conditions | |
Operating temperature | -0℃~ 40℃ |
Storage temperature | -10℃~ 70℃ |
Operating humidity | 10% ~ 90% non-condensing |
G.hn performances | |
Line Modulation Way | OFDM (Orthogonal Frequency Division Multiplexing) |
G.hn Specification | 2 ~ 200 MHz for Baseband (2~200MHz SISO, 2~100MHz MIMO) Support 2 wire SISO and 4 wire MIMO, coaxial cable Power Mask Notching Dynamic PSD NDIM (Neighbor Domain Interface Mitigation) Radio Band Notching function NEXT (Near End Crosstalk) Mitigation |
Software | |
MAC Address | 16K |
VLAN Numbers | 4K, 256 VLAN groups |
Layer 2 | 802.1W STP, RSTP, MSTP 802.1D Spanning Tree Protocol 802.1Q VLAN 802.3ad Link Aggregation (MAX 8 Groups & 8 members for each group) Jumbo Frame up to 9K |
Management | Web-based management GUI CLI Syslog, SNMP v1/v2c/v3, SNMP trap, RMON, TFTP SNTP, Port Mirroring Security by using password for log-in via Console and Telnet Factory restores Reboot Firmware upgrade Configuration backup and restore |
Multicast | IGMP Snooping V1/V2 Multicast Group up to 512 Multicast Traffic Block / Filtering Protection of malicious multicast traffic from subscriber port |
DHCP | DHCP DHCP Request Flooding protection (DHCP snooping rate-limiting) DHCP Option 82 Circuit-ID: port information user connected Remote-ID: MAC address information of Relay device |
Security | DLF, Broadcast DHCP Filtering, Mac Filtering, NetBEUI, NetBIOS Filtering, NBT Packet filtering based on IP address and TCP, UDP port Flooding protection (static MAC, MAC count) Multicast/Broadcast flooding protection Service classifying for the Control Packet (Ping, Telnet, SNMP, TFTP etc.) NetBIOS/ NetBEUI/ NBT filtering 8 CPU queue, Rate-limit to CPU traffic IP/TCP/UDP Port Filtering |
QoS / ACL | Layer 2(Source/Destination MAC Address, VLAN ID, COS Field) Layer 3(Source/Destination IP Address, DSCP Field) Priority/Parameter based QoS 8 queue per port SPQ, WRR, SPQ + SDWRR: port, queue DSCP marking/remarking Ingress ACL: 128 |
Related Products
