TS-G4201T
1 Port G.hn Copper CPE, 1xGE
Find a Distributor Contact Us
TS-G4201T is based on G.hn Wave 2 technology that enable physical link data rate up to 1Gbps over existing twisted-pair infrastructure. TS-G4201T is the CPE solution of G4200 GigaWire Copper series. 1*G.hn port and 1*GE Ethernet port.
- Retrofit IP-based IPTV, Internet, VoIP over existing twisted pair infrastructure
- Extends fiber-like data speed using existing home twisted pair wiring
- Gigabit Access Using bundled-2pair Phone Line
- 2~100MHz MIMO
- Support DMT/OFDM line modulation
- G.hn frequency notches management and dynamic bandwidth allocation optimizes throughput based on activity
- Various QoS capability (IEEE 802.1p / Port / Diffserv)
- Classification of different packet formats (IPv6, IPv4, double tagged, HTLS, IEEE 802.1Q, Ether II, IEEE 802.3)
- IGMP snooping for filtering multicast traffic
- Support SNMP v1/v2c/v3, SNMP trap and SNMP client
- Support G.hn CPE devices monitor and configure from master
- Support remote firmware upgrade for both Master and CPE
Hardware | |
System Architecture | G.hn Wave2 Twisted Pair CPE 1 x G.hn port, RJ-11 connector 1 x 10/100/1000BT RJ-45 port |
Physical Dimension | 111.5mm x 83mm x 24.5mm |
LED | Power, RJ-45 port link/active, G.hn Link |
Weight | 190g |
Input power & frequency | DC12V/1A Power Adaptor |
Power consumption | <3 W |
Environment Conditions | |
Operating temperature | 0℃~ 40℃ |
Storage temperature | -25℃~ 80℃ |
Operating humidity | 5% ~ 95% non-condensing |
G.hn performances & Specification | |
Line Modulation Way | OFDM (Orthogonal Frequency Division Multiplexing) |
G.hn Specification | 2 ~ 200 MHz for SISO Mode, 2 ~ 100 MHz for MIMO Mode Power Mask Notching Dynamic PSD NDIM (Neighbor Domain Interface Mitigation) Radio Band Notching function NEXT (Near End Crosstalk) Mitigation |
