TS-OTDR801P
Portable Single Mode ODTR
Find a Distributor Contact Us
- Home
- /
- FIBER OPTIC TESTERS &...
- /
- FTTX OTDR
- /
- TS-OTDR801P
As a new generation of intelligent OTDR, TS-OTDR801P is mainly used to measure the length, loss and connection quality of optical fibers and cables. It can realize the accurate positioning of incident and fault points, and can be widely used in the construction, maintenance test and emergency repair of optical fiber communication systems, as well as the research, production and production measurement of optical fiber cables. This product can provide you with the highest performance solutions for the installation and construction of optical fiber network structures and subsequent fast and efficient maintenance and troubleshooting tests.
- Novel appearance design, solid and durable
- The simplest interface and intuitive operation
- Unique dual operation mode of buttons and touch screen
- One-click analysis function
- High-capacity lithium battery (more than 10 hours of continuous working time)
Type of optical fiber | Single mode |
Center wavelength | 1,310nm/1,550nm±20nm |
Maximum dynamic range (dB) 1 | 30/29 |
Event blind zone 2 | 1.5m |
Attenuation blind zone | 10m |
Display type | 3.5 inch, color LCD, touch screen operation |
Optical interface | FC/UPC (Interchangeable SC, ST) |
Test range (dB) | 500m, 1km, 2km, 4km, 8km, 16km, 32km, 64km, 128km |
Pulse width | 10, 30, 50, 100, 275, 500, 1,000, 5,000, 10,000ns |
Range accuracy | ± (1m + sampling interval +0.005% × distance) |
Attenuation measurement accuracy | ±0.05 dB/dB |
Reflection measurement accuracy | ±4 dB |
Data storage | ≥ 1,000 test curves |
Communication interface | USB |
VFL | |
Output power | ≥2 mW |
Test distance | ≥5 km |
Environmental Adaptability | |
Power supply mode | AC/DC adapter: AC: 100V ~ 240V (1.5A), 50/60Hz DC: 18V to 20V (2A) Internal lithium-ion battery pack: 7.4V, 4400mAh |
Battery operation time 3 | ≥ 10hours |
Operating temperature (℃) | -5~50 |
Storage temperature (℃) | -20~70 |
Relative humidity | 0~95%, no condensation |
Weight (Kg) | 0.9 |
Volume (mm) | 208×110×56 |
FC-LC Hybrid Adaptor (TS-FLHA-01)
For the hybrid adaptor we provide especially used on the hybrid from the female connector of the tester to the patch cord of LC or MU male connector. This hybrid adaptor is featured with low loss and very easy to carry. The LC side of this hybrid adapter we have two optional choice, one is LC fixed another type is 1.25mm universal.
Related Products
